DFM for electronics: design choices that cut cost and rework
Design for manufacturing (DFM) means making choices early that the factory can build quickly, test easily and repeat thousands of times. Most of them cost nothing if made at the start.
Short answer: use parts you can buy in volume, keep the board within standard process limits, avoid hand-soldered parts where you can, and plan how each board will be tested before the layout is finished. A DFM review before the first build catches most problems while they are still cheap to fix.
Board choices
- Layer count. Use as few layers as the design really needs. Each extra layer adds cost.
- Thickness and finish. Standard thicknesses and common surface finishes keep lead times short.
- Panel design. Small boards are built several to a panel; plan rails and break-off points with the factory.
- Clear markings. Readable reference designators and polarity marks reduce assembly and inspection errors.
Part choices
- Common packages. Widely used package sizes place reliably and are easy to source.
- Second sources. Where possible, choose parts with alternatives, so one shortage doesn't stop production.
- Fewer through-hole parts. Through-hole parts often need wave or hand soldering, which adds a step and cost.
- Fewer unique parts. Reusing the same resistor and capacitor values cuts setup time.
Plan testing early
Decide how each board will be checked before the layout is locked, then add test points where needed. Common steps include solder-paste inspection (SPI), automated optical inspection (AOI), X-ray for parts with hidden joints, in-circuit test (ICT) and functional test (FCT). Not every product needs all of them; agree the coverage for each build.
Our process limits
These are our standard limits. Designs inside them build without special handling. The full list, with inspection and test equipment, is on our manufacturing site: capabilities and quality.
| Item | Standard |
|---|---|
| PCB layers | 1–8 |
| Board thickness | 0.4–3.2 mm |
| Smallest passive package | 0201 |
| Minimum BGA pitch | 1.0 mm |
| Trace / spacing | 4/4 mil |
| Surface finish | HASL, ENIG or OSP |
When we do DFM
When we design your product, DFM is part of the work and you receive a DFM report with the design files. If you bring an existing design, we review it before the first build and list what to change and why.
Tell us about your product
Send a short description and an engineer replies within 1 business day after we confirm we have your request. Orders from 1 board.
Send your inquiry